archives

Juniper EX Series

This tag is associated with 3 posts

Setting an Uplink VCP on a Standalone Switch – Juniper EX4200

You can set an uplink VCP on a standalone switch. You must set an uplink port on the standalone switch as a VCP prior to physically interconnecting the switch with the existing Virtual Chassis configuration. Otherwise, the master cannot detect that the switch is a member of the Virtual Chassis configuration. To set one uplink … Continue reading

Juniper Ex4200 Physical Interconnects

. EX4200 switches are available in models with 24 or 48 ports and with either all, or only 8 ports equipped for PoE. All EX4200 switches have dedicated 64-Gbps VC ports. Optional uplink modules are available for all EX4200 switches. Uplink modules provide 2 – 10 GB XFP transceivers, 4 – 1 GB SFP transceivers, … Continue reading

Juniper EX 4500 – Virtual Chassis & Interconnect

  EX4500 switches ship with either the intraconnect module or the Virtual Chassis module preinstalled. Both modules are installed horizontally on the rear of chassis. However, only one of the modules can be installed at a given time. The intraconnect module helps the switch achieve line rate on all its ports. The VC module has … Continue reading